Before installing · MIFM1 0.16.84Avant d’installer · MIFM1 0.16.84
Which FM-1?Quel FM-1 ?
Look under the screen.Regarde sous l’écran.
The FM-1s sold since autumn 2026 carry another memory chip, and a white M-VAVE printed under the screen. MIFM1 works on both; only a few steps differ. Pick yours.Les FM-1 vendus depuis l’automne 2026 ont une autre puce mémoire, et un M-VAVE blanc imprimé sous l’écran. MIFM1 marche sur les deux ; seules quelques étapes changent. Choisis le tien.
The stepsLes étapes
Pick your FM-1 above: its steps show here.Choisis ton FM-1 plus haut : ses étapes s’affichent ici.
- 01
Plug it inBranche-le
The FM-1 to the computer over USB, directly, with a data cable. Open the installer in Chrome or Edge.Le FM-1 à l’ordinateur en USB, directement, avec un câble de données. Ouvre l’installateur dans Chrome ou Edge.
Open the installer (MIFM1 0.16.84)Ouvrir l’installateur (MIFM1 0.16.84) →
- 02
InstallInstalle
Press Install and let the page run to the end: the firmware, then the modules’ tables. Do not unplug while it writes.Clique Installer et laisse la page aller jusqu’au bout : le firmware, puis les tables des modules. Ne débranche pas pendant l’écriture.
- 03
m-bootloader, if you likem-bootloader, si tu veux
“Also install m-bootloader” adds a recovery menu (PLAY held at power-on) and an update mode (REC), even when a firmware no longer starts. Optional.« Also install m-bootloader » ajoute un menu de secours (PLAY tenu à l’allumage) et un mode mise à jour (REC), même quand un firmware ne démarre plus. Facultatif.
That’s all. The next updates go the same way, from MIFM1.C’est tout. Les mises à jour suivantes se font de la même façon, depuis MIFM1.
- 01
MIFM1 already on it?MIFM1 déjà dessus ?
Only if a MIFM1 older than 0.16.62 is installed: that version writes nothing on this chip, so the page cannot reach it. Put the stock firmware back first with the recovery tool, then go on. Still on M-VAVE’s firmware: skip this step.Seulement si un MIFM1 antérieur à 0.16.62 est installé : cette version n’écrit rien sur cette puce, la page ne la trouve donc pas. Remets d’abord le firmware d’origine avec l’outil de récupération, puis continue. Encore sur le firmware d’M-VAVE : passe cette étape.
- 02
Plug it inBranche-le
The FM-1 to the computer over USB, directly, with a data cable. Open the installer in Chrome or Edge.Le FM-1 à l’ordinateur en USB, directement, avec un câble de données. Ouvre l’installateur dans Chrome ou Edge.
Open the installer (MIFM1 0.16.84)Ouvrir l’installateur (MIFM1 0.16.84) →
- 03
Leave m-bootloader untickedLaisse m-bootloader décoché
Do not tick “Also install m-bootloader”: whether it handles this chip is not known yet.Ne coche pas « Also install m-bootloader » : on ne sait pas encore s’il gère cette puce.
- 04
InstallInstalle
Press Install and let the page run to the end: the firmware, then the modules’ tables. Do not unplug while it writes.Clique Installer et laisse la page aller jusqu’au bout : le firmware, puis les tables des modules. Ne débranche pas pendant l’écriture.
- 05
CheckVérifie
GLO, then SELECT one notch: the PROJECT page’s last line says “tables OK”, and what you save stays after power-off. FLASH NOT KNOWN on the screen: tell us.GLO, puis SELECT d’un cran : la dernière ligne de la page PROJECT dit « tables OK », et ce que tu sauvegardes reste après l’extinction. FLASH NOT KNOWN à l’écran : dis-le-nous.
That’s all. The next updates go the same way, from MIFM1.C’est tout. Les mises à jour suivantes se font de la même façon, depuis MIFM1.
The white M-VAVE is a visual guide. The sure sign is the flash chip’s ID: M-Flasher shows it in download mode, 0x856014 for the first model (Puya), 0xB36014 for the recent one (UC25HQ80). Use it only to read: it can also write a firmware and change the bootloader.Le M-VAVE blanc est un repère visuel. Le signe sûr, c’est l’identifiant de la puce : M-Flasher l’affiche en mode téléchargement, 0x856014 pour le premier modèle (Puya), 0xB36014 pour le récent (UC25HQ80). Ne t’en sers que pour lire : il sait aussi écrire un firmware et changer le bootloader.
M-VAVE’s firmware V16Le firmware V16 d’M-VAVE
V16 is the latest update of the stock firmware (autumn 2026), with a new bootloader. Some other firmwares cannot install over it yet, hence the rumour that it blocks them all. It is a software update: either model can run it.La V16 est la dernière mise à jour du firmware d’origine (automne 2026), avec un nouveau bootloader. Certains autres firmwares ne savent pas encore s’installer par-dessus, d’où la rumeur qu’elle les bloque tous. C’est une mise à jour logicielle : les deux modèles peuvent l’avoir.
- 01
Stay on V16Reste en V16
No need to go back to V15 first: fm1-base, which MIFM1 is built on, installs over V16 (tested by its authors on an FM-1).Pas besoin de repasser en V15 avant : fm1-base, sur lequel MIFM1 est construit, s’installe par-dessus la V16 (testé par ses auteurs sur un FM-1).
- 02
Follow your model’s stepsSuis les étapes de ton modèle
The first model or the recent one, above: V16 has nothing to do with the memory chip, both models can run V15 or V16.Le premier modèle ou le récent, plus haut : la V16 n’a rien à voir avec la puce mémoire, les deux modèles peuvent être en V15 ou en V16.
- 03
Leave m-bootloader untickedLaisse m-bootloader décoché
V16 brings its own new bootloader, which m-bootloader would replace: that case is not confirmed yet.La V16 apporte son propre bootloader, que m-bootloader remplacerait : ce cas n’est pas encore confirmé.
- 04
Stuck? Do not loopBloqué ? Pas en boucle
If the page does not find the FM-1 or stops on an error, do not start again and again: note the message and tell us. “Back to the stock firmware”, at the bottom of the installer, puts M-VAVE’s firmware back if needed.Si la page ne trouve pas le FM-1 ou s’arrête sur une erreur, ne relance pas en boucle : note le message et signale-le. « Back to the stock firmware », en bas de l’installateur, remet le firmware d’M-VAVE si besoin.
- 05
Back to V16 laterRevenir à la V16 plus tard
Download M-VAVE’s file from its site, then “Back to the stock firmware” at the bottom of the installer.Télécharge le fichier sur le site d’M-VAVE, puis « Back to the stock firmware » en bas de l’installateur.
A problem, a doubt, an FM-1 that does not match? MIFM1’s GitHub issues. Sources: fm1-base (the two chips), musicfreaks.jp (the M-VAVE under the screen), Felucca #619 (V16).Un problème, un doute, un FM-1 qui ne ressemble à aucun des deux ? Les issues GitHub de MIFM1. Sources : fm1-base (les deux puces), musicfreaks.jp (le M-VAVE sous l’écran), Felucca #619 (V16).